How to tile a curved floor
By Tal | 2014-01-15
Another option to achieve a professional tile installation around a curve is to cut square or rectangular tiles into several pieces to fit around the curve.
Cutting a tile in pieces to fit the curve
1. Measure the curve with a Tilemate profile gauge and transfer the measurement onto the tile.
2. Work out the number of straight cuts the tile will require to fit around the curve and in the current tile layout. Remember to leave space for grout.
- Use a Tilemate pencil cutter to score the glazed surface of the tile on the measured mark, using another tile as a straight edge.
- Use a tile breaker to apply pressure on the scored tile to achieve a clean break. Use a Tilemate tile grate to neaten the cut area.
If you have to make more than one cut, consider using a Tilemate manual tile cutter:
To score the tile, place the tile on the cutting surface. Place the cut line over and parallel to the raised metal bar, called the fulcrum.
Raise the handle and align the tile precisely with the cutting wheel.
Press the blade down onto the surface of the tile. Press it hard enough to score the surface of the tile and push the blade away from you while maintaining the pressure.
After the surface is scored, lift the handle of the tile cutter and position the metal foot over the tile, at its centre. Set the foot in position and pull the handle down with enough force to snap the tile in two.
Use a Tilemate tile grate to smooth the edge of the cut tile.
- A tile cutter is recommended for smooth ceramic and porcelain tiles. A tile saw is recommended for textured tiles.
- Regularly visit TAL Talk for handy tiling tips.
[Back]
blog comments powered by Disqus
