TAL’s screed and cement range produces smooth, high strength and hard wearing floor surfaces. Included in the screed range are TAL SCREEDMASTER that offers a super-smooth and level finish and TAL SUPERSCREED, which is used to level imperfections in flooring surfaces. TAL also offers TALCEM, a cement for the preparation of mortars to be used as screeds or renders. All the products in the range offer a high compressive strength.
Underlayments & Screeds
TALCEM is a specially formulated rapid-setting Grey Cement, requiring the addition of sand and, where necessary, stone (no greater than 6mm), and mixing with clean (potable) water, for the preparation of rapid-setting shrinkage-compensated mortars to be used as Screeds, Toppings and Renders for interior and exterior applications
TAL RAPIDFIX is a single-component high-performance Patching and Repair compound manufactured from rapid-setting shrinkage-compensated cement and selected aggregates specially designed for repairing of deteriorated concrete and mortar surfaces as well as patching holes in floor and wall surfaces.
TAL SUPERSCREED is a grey single-component high-performance levelling and smoothing underlayment. Floor coverings can be fixed after 24 hours, depending on application thickness and ambient conditions, once the moisture content of the floor has been tested and confirmed suitable to receive the intended floor covering. When mixed withTAL SCREEDBINDER (as a total water replacement) it is also suitable for use as a protective barrier over under tile heating elements and for commercial installations where rubber caster wheels form the majority of the traff.
Application thickness: 5mm or less
TAL SCREEDMASTER is a single-component high-performance self-levelling and smoothing underlayment manufactured from rapid-setting shrinkage-compensated cement and selected aggregates designed with high flow properties when added to water to produce a smooth, flexible and hard wearing floor surface prior to the fixing of floor coverings with minimum installation time. Floor coverings can be fixed after 24 hours, depending on application thickness and ambient conditions.
Application thickness: 3mm, up to 16mm